Protec Bekaert Pressure Vessels

Selection cues: housing diameter · pressure rating · port format and element count

The PROTEC® line offers membrane pressure vessels designed to simplify RO system construction and operation. These vessels conform to ASME Code, Section X.

Permeate Pressure: Do not operate the vessel permeate port over 125 psi (8.6 bar) without prior factory approval · Head Removal: To move the head inboard, tap approximately 1/8” (3 mm). The bearing plate includes tapped 5/16-18 or 8 mm holes for removal tools · Head Loading: When installing, tap the head into the vessel using a 2-3 lb (1-1.5 kg) dead blow hammer. After shimming, the head should clear the retaining ring groove by about 1/8” (3 mm)

These Protec™ pressure vessels from Bekaert are designed for housing RO membrane elements and feature a filament-wound reinforced plastic shell.

Design Pressure: 6000 psi (57 bar) · Hydrostatic Test Pressure: 1.5x design pressure · Operating Temperature: 0 to 90 °C (32-194 °F)

These FRP collectors are designed for RO membrane systems and feature a spindled head design for distributing feed or collecting concentrate flow.

Selection cues: housing diameter · pressure rating · port format and element count

This is a Protec Bekaert PRO 4 300 EP reverse osmosis membrane pressure vessel.

Selection cues: housing diameter · pressure rating · port format and element count

This is a Protec Bekaert PRO 4 300 EP BSP reverse osmosis membrane pressure vessel.

Selection cues: housing diameter · pressure rating · port format and element count

This is a Protec Bekaert RO membrane pressure vessel for water treatment applications.

Pressure: 600 psi

The PRO 4 600 EP is a membrane pressure vessel for reverse osmosis systems.

Pressure: 1000 psi

This is a PRO 4 1000 EP reverse osmosis membrane pressure vessel from Protec Bekaert.

Selection cues: housing diameter · pressure rating · port format and element count

The PRO 4 300 SP is a membrane pressure vessel designed for reverse osmosis systems.

Selection cues: housing diameter · pressure rating · port format and element count

This is a Protec 4 450 SP RO membrane pressure vessel.

Selection cues: housing diameter · pressure rating · port format and element count

This PRO 4 300 EP is a Reverse Osmosis membrane pressure vessel.

Pressure: 600 psi

This is a Protec Bekaert Pressure Vessel designed for RO membrane applications.

Pressure: 1000 psi

This Protec 4 1000 EP is a membrane pressure vessel for RO systems.

Selection cues: housing diameter · pressure rating · port format and element count

This is a Protec Bekaert Pressure Vessels PRO membrane pressure vessel for RO systems.

Selection cues: housing diameter · pressure rating · port format and element count

This is a Protec Bekaert Pressure Vessel for RO membrane applications.

Selection cues: housing diameter · pressure rating · port format and element count

The PRO 8 450 EP is a reverse osmosis membrane pressure vessel from Protec Bekaert.

Pressure: 600 psi

The PRO 8 600 EP is a reverse osmosis membrane pressure vessel.

Pressure: 1000 psi

The PRO 8 1000 EP is an RO membrane pressure vessel designed for high-pressure applications.

Pressure: 1200 psi

This is the PRO 8 1200 EP, a reverse osmosis membrane pressure vessel from Protec Bekaert.

Selection cues: housing diameter · pressure rating · port format and element count

The PRO 8 150 SP is a RO membrane pressure vessel from Protec Bekaert.

Selection cues: housing diameter · pressure rating · port format and element count

This product is a RO membrane pressure vessel from Protec Bekaert.

Selection cues: housing diameter · pressure rating · port format and element count

This is a PRO 8 450 SP pressure vessel from Protec Bekaert Pressure Vessels, designed for reverse osmosis applications.

Pressure: 600 psi

This Protec Bekaert pressure vessel is designed for RO membrane applications.

Pressure: 1000 psi

This is a Protec Bekaert RO membrane pressure vessel designed for water treatment applications.

Pressure: 1200 psi

This is a Protec Bekaert PRO 8 1200 SP reverse osmosis membrane pressure vessel.

Selection cues: housing diameter · pressure rating · port format and element count

This product is a Protec Bekaert RO membrane pressure vessel.

Selection cues: housing diameter · pressure rating · port format and element count

This is a Protec Bekaert Pressure Vessel for RO membrane applications.

Pressure: 600 psi

This is a PRO 8 600 MSP model RO membrane pressure vessel from Protec Bekaert Pressure Vessels.

Pressure: 1000 psi

This product is an RO membrane pressure vessel from the PRO series.

Pressure: 1200 psi

This is a Protec Bekaert pressure vessel designed for RO membrane applications.

Pressure: 1000 psi

This is a Protec Bekaert RO membrane pressure vessel.

Pressure: 1000 psi

This is a Protec Bekaert Pressure Vessels BPV 8 1000 SP model designed for RO membrane applications.

Pressure: 1000 psi

This is a Protec Bekaert Pressure Vessels BPV 8 1000 MSP model.

Pressure: 1200 psi

The BPV 8 1200 EP is a reverse osmosis membrane pressure vessel.

Pressure: 1200 psi

This Protec Bekaert BPV 8 1200 SP is a reverse osmosis membrane pressure vessel designed for water treatment applications.

Pressure: 1200 psi

This is a Protec Bekaert Pressure Vessels RO membrane housing designed for pressure vessel applications.

Selection cues: housing diameter · pressure rating · port format and element count

The PRO 8 300 EP is a RO membrane pressure vessel from Protec Bekaert designed for pressure applications.

Selection cues: housing diameter · pressure rating · port format and element count

The PRO 8 450 EP is a membrane pressure vessel for reverse osmosis systems.

Pressure: 600 psi

The PRO 8 600 EP is a reverse osmosis membrane pressure vessel from Protec Bekaert.

Pressure: 1000 psi

This PRO 8 1000 EP is a Reverse Osmosis membrane pressure vessel from Protec Bekaert.

Pressure: 1200 psi

This is a Protec Bekaert PRO 8 1200 EP reverse osmosis membrane pressure vessel designed for membrane separation.

Selection cues: housing diameter · pressure rating · port format and element count

This is a Protec Bekaert RO membrane pressure vessel for general use.

Selection cues: housing diameter · pressure rating · port format and element count

This is a Protec Bekaert Pressure Vessels PRO 8 450 SP RO membrane housing.

Pressure: 600 psi

This is a Protec S PRO 8 600 SP, designed as a standard pressure vessel for RO membrane applications.

Pressure: 1000 psi

This is a PRO 8 1000 SP model from Protec Bekaert Pressure Vessels, designed for RO membrane applications.

Pressure: 1200 psi

The Protec Bekaert PRO 8 1200 SP is a RO membrane pressure vessel designed for water treatment applications.

Selection cues: housing diameter · pressure rating · port format and element count

The PRO 8 300 MSP is an RO membrane pressure vessel from Protec Bekaert.

Selection cues: housing diameter · pressure rating · port format and element count

This is a Protec Bekaert PRO 8 450 MSP RO membrane pressure vessel.

Pressure: 600 psi

This is a Protec Bekaert PRO 8 600 MSP, an RO membrane pressure vessel.

Pressure: 1000 psi

This is a Protec Bekaert PRO 8 1000 MSP RO membrane pressure vessel.

Pressure: 1200 psi

The PRO 8 1200 MSP is a reverse osmosis membrane pressure vessel.

Pressure: 1000 psi

This is a Protec Bekaert pressure vessel designed for RO membrane applications.

Pressure: 1200 psi

This Protec Bekaert BPV 8 1200 EP is a Reverse Osmosis membrane pressure vessel.

Pressure: 1800 psi

This is a Protec Bekaert RO membrane pressure vessel for water treatment applications.

Pressure: 1000 psi

This is a Protec Bekaert Pressure Vessels BPV 8 1000 SP, a housing designed for RO membrane applications.

Pressure: 1200 psi

This product is a Protec Bekaert Pressure Vessels BPV 8 1200 SP for RO membrane applications.

Pressure: 1000 psi

This Protec Bekaert pressure vessel is designed for RO membrane applications.

Pressure: 1200 psi

This is a Protec Bekaert Pressure Vessels BPV 8 1200 MSP reverse osmosis membrane housing.

Permeate Port Pressure: Do not operate over 125 psi (pressures exceeding 125 psi require factory approval) · Design Pressure at 120 °F (50°C): 250 PSI · Factory Test Pressure: 375 PSI

The BEKAERT Model OI8040Xf is an end-ported fiberglass reinforced plastic pressure vessel designed to house eight-inch nominal diameter spiral-wound or hollow fiber...

Maximum Permeate Port Pressure: 8.5 bar (125 psi) (pressures in excess require factory approval) · Permeate Port Diameter: ∅ 47 (1" NPT) · Design Pressure at 120 °F (50°C): 18 BAR (250 PSI)

The Bekaert SL8040Xf is a side-ported RO membrane pressure vessel designed for typical brackish water purification at pressures up to 250 PSI.

Head Bearing Plate: Hard Anodized Aluminum 6061 T6 or 6082 T6 · Working Pressure: 400 psi (28 kg/cm²) · Design Pressure: 400 psi

The Protec OI8040 is a series of fiberglass-epoxy resin pressure vessels designed for reverse osmosis membrane elements.

Permeate Port Pressure: Do not operate over 125 psi. Permeate pressure in excess of 125 psi must be approved by the factory prior to operation · Feed/Permeate connections: 1.5" VICTAULIC, 1" NPT · Head Bearing Plate: Hard Anodized Aluminum 6061 T6 or 6082 T6

This Bekaert OI8040Xb is a filament-wound reinforced plastic RO membrane pressure vessel designed for brackish water applications.

Permeate Port Pressure: Do not operate over 8.5 bar (125 psi) without factory approval · Permeate Port Connection: 1" NPT · Design Pressure: 28 BAR (400 PSI) at 120 °F (50°C)

This Bekaert SL8040Xb is a side-ported reverse osmosis membrane pressure vessel designed for typical brackish waters up to 10000 ppm TDS.

Maximum Permeate Port Pressure: 125 psi (higher pressures require factory approval) · Design Pressure at 120 °F (50°C): 600 PSI · Factory Test Pressure: 900 PSI

The Bekaert OI8040Xm is an end-ported RO membrane pressure vessel designed for housing eight-inch nominal diameter spiral-wound or hollow fibre elements for typical...

Permeate Port Operating Pressure: Do not operate over 125 psi. Permeate pressure in excess of 125 psi must be approved by the factory prior to operation · Head Lock Groove: Stainless Steel 316L · DESIGN PRESSURE AT 120 °F (50°C): 1000 PSI

The Bekaert OI8040Xa is an end-ported membrane pressure vessel designed for purifying brackish waters up to 1000 PSI.

Permeate Port Pressure: Do not operate over 8.5 bar (125 psi). Higher pressures require factory approval · Head Lock Grove: Stainless Steel 316L · Design Pressure at 120 °F (50°C): 70 BAR (1000 PSI)

This Bekaert SL8040Xa pressure vessel is designed for seawater purification and houses eight-inch nominal diameter spiral-wound elements.

Permeate port pressure: Do not operate over 125 psi. Permeate pressure in excess of 125 psi must be approved by the factory prior to operation · DESIGN PRESSURE AT 120 °F (50°C): 1200 PSI · FACTORY TEST PRESSURE: 1800 PSI

This Bekaert OI8040Xh is an eight-inch nominal diameter RO membrane pressure vessel designed for continuous use and housing for membrane filtration elements.

Permeate Port Pressure: Do not operate over 8.5 bar (125 psi). Pressures in excess must be approved by the factory · Head Lock Grove: Stainless Steel 316L · Feed Port (part of Head): Stainless steel SA-475 Designation UNS: S32750

The Bekaert SL8040Xh is an ASME Section X compliant RO pressure vessel designed for housing eight-inch spiral-wound or hollow fiber membrane elements for seawater...

Options for various pressure ratings: 100, 400, 600, 1000, 1200 psi · Pressure range: 0 to 1200 psi · Hardness range: 0 to 800

This listing provides components for Protec Bekaert 8-inch SP MSP RO membrane pressure vessels. Available materials include FRP, Polyester, Stainless Steel, and GRP.

Selection cues: housing diameter · pressure rating · port format and element count

This product listing is for components compatible with 8-inch EP series Protec Bekaert pressure vessels, offering various options for end caps, mounting straps.