Jet mixers
1 model in this family. Representative models: JT4710.
International brand dossier
Flygt Pumps
Xylem is a global water technology company whose pump and treatment brands include Flygt, Goulds Water Technology, Godwin, Lowara, and Ionpure.Its influence in water projects is practical and installed-base driven: the same corporate portfolio can cover groundwater and boosting, wastewater pumping, dewatering rental, high-purity polishing, monitoring, and service support.
Flygt Pumps's position in pumps and pumping equipment is defined by product families such as Jet mixers, Concertor, 3000 Series Heavy-duty Sewage pump (Rental) and Compact pump.The portfolio is best understood inside raw water intake, RO/NF feed, transfer, boosting, chemical dosing, wastewater lift, and desalination hydraulics, where engineers compare the technology route, family boundaries, and duty fit before narrowing to individual models.
Representative series on this page include JT4710, Concertor DP N80-7800 and Concertor DP N100-7800.Selection should focus on flow, head, efficiency, NPSH margin, wetted materials, seals, and drive arrangement.
53
Indexed models
20
Product families
0
Subgroups
Product range and selection
How to choose Flygt Pumps & Pumping
This section answers two questions: which main product families Flygt offers, and which parameters to compare before choosing a specific model.
Step 1: Choose a product family by application
The main families shown on this page are Jet mixers, Concertor, 3000 Series Heavy-duty Sewage pump (Rental), and Compact pump. Start with the treatment objective, equipment format, and operating duty, then use the model index below to compare exact specifications.
Step 2: Confirm the model by key parameters
After choosing a product family, compare flow and head, materials, efficiency, and duty cycle. Replacement projects should also verify installation or loading conditions, interfaces, and compatibility with the existing system; new projects should consider operating practice, maintenance, and spare-parts or consumables availability.
Product family overview
Showing 6 main families; all 20 appear in the model index below.
Concertor
4 models in this family. Representative models: Concertor DP N80-7800, Concertor DP N100-7800, Concertor DP N150-5850.
3000 Series Heavy-duty Sewage pump (Rental)
2 models in this family. Representative models: NS 3315.090, CS 3400/805.
Compact pump
2 models in this family. Representative models: CP 3045 HT, CP 3057 HT.
Pressure sewage pump
2 models in this family. Representative models: C 3045, M 3102.
Drainage pump
5 models in this family. Representative models: 2620.170, 2630.180, 2640.180.
Quick Model Index
Fast lookup for 53 indexed products
Search models, families, applications, or parameters; compare 2–4 candidates, save or export the shortlist, and open it on another device by link or QR code.
Showing 53 of 53 models
Select 2–4 models to compare. Your shortlist is saved on this device and can travel by link or QR code.
JT4710
Jet mixers
Power: 2.4 kW
The Flygt JT 4710 is a jet mixer designed for contaminated water and sludge, featuring an engineered ejector system and a dry-installed Flygt N-pump.
Concertor DP N80-7800
Concertor
Nominal power: 7.3 kW · Set power: 7800 W · Power Supply: 24 V DC
The Concertor DP N80-7800 is a process-controlled wastewater pumping system featuring integrated gateways and specialized control algorithms.
Concertor DP N100-7800
Concertor
Nominal power: 7.3 kW · Set power: 7800 W · Power Supply: 24 V DC
The Concertor DP N100-7800 is a process-controlled wastewater pumping system featuring a grey cast iron impeller and a semi-permanent installation type.
Concertor DP N150-5850
Concertor
Maximum Flow Rate (from performance curve): Approximately 360 m³/h · Maximum Head (from performance curve): Approximately 16.5 m · Nominal Power: 5.5 kW
The Concertor DP N150-5850 is a process-controlled wastewater pumping system featuring multiple pumps and a gateway per pump.
XPC
Concertor
Flow meters: MagFlux · Water temperature: Used up to 70°C · Liquid temperature: Maximum 40°C (104°F)
The Concertor™ N/EA/DP series are intelligent wastewater pumping systems designed for sustained high efficiency. These pumps.
NS 3315.090
3000 Series Heavy-duty Sewage pump (Rental)
Flows: Up to 16,000 US GPM (1,000 l/s) · Heads: Up to 400 ft (120 m) · Motor Operating Temperature: NEMA Class B maximum operating temperature rise of 80°C (176°F)
The Flygt N-pump Series offers self-cleaning submersible pumps designed for high efficiency in wastewater, stormwater, and industrial effluent applications.
CS 3400/805
3000 Series Heavy-duty Sewage pump (Rental)
General performance range: up to approx. 3000 l/s
The Flygt CS 3400/805 is a submersible waste and raw water pump designed for municipal sewage, irrigation, and industrial applications.
CP 3045 HT
Compact pump
Power supply: 1-phase or 3-phase · Liquid temperature: Maximum 40°C (104°F) · Liquid temperature, warm water version: Maximum 70°C (158°F)
The Flygt CP 3045 HT is a submersible C-pump designed for high-head applications with clean water or light wastewater.
CP 3057 HT
Compact pump
Power supply: 1-phase or 3-phase · Liquid temperature: Maximum 40°C (104°F) · Liquid temperature, warm water version: Maximum 70°C (158°F)
The Flygt 3057 HT is a submersible pump designed for wastewater, sludge, and groundwater applications.
C 3045
Pressure sewage pump
Power supply: 1-phase or 3-phase · Liquid temperature: Maximum 40°C (104°F) · Liquid temperature, warm water version: Maximum 70°C (158°F)
The Flygt 3045 is a submersible pump available in C-pump (high head) and D-pump (medium head vortex) models for various liquid types and installation configurations.
M 3102
Pressure sewage pump
Power supply: 3-phase · Liquid temperature: Maximum 40°C (104°F) · Liquid temperature, warm water version: Maximum 70°C (158°F) (available as an option for non-explosion proof C, D, F, and N Standard pumps)
The Flygt 3102 series offers submersible pumps for various wastewater and fluid transfer applications, with specialized C, D, F, M, and N pump types available.
2620.170
Drainage pump
Liquid Temperature (Standard): 40°C · Liquid Temperature (Warm Liquid Version Option): max 70°C · Liquid Density: max 1100 kg/m³
The Flygt 2600 series pump is a portable unit designed for medium head applications. It features a wear-resistant Hard-Iron impeller with Dura-Spin™ technology and a...
2630.180
Drainage pump
Liquid Temperature (Standard): max 104°F (40°C) · Liquid Temperature (Warm Liquid Version Option): max 158°F (70°C) · Liquid Density: 9.2 lb. per US gal. (1100 kg/m³)
The Flygt 2630 is a portable, 3-phase submersible pump designed for high head or medium head applications.
2640.180
Drainage pump
Power: 5.6 kW · Liquid temperature: 40°C (standard) · Liquid density: max 1100 kg/m³
This Flygt 2640 series pump is a portable unit designed for dewatering applications, featuring a 3-inch discharge and a 5.6 kW, 3-phase motor.
2660.180
Drainage pump
Liquid density: 9.2 lb. per US gal. (1100 kg/m³) · Strainer hole dimension: ø 0.39” (10.0 mm) · pH of the pumped liquid: pH 5–8
The Flygt 2660 is a portable dewatering pump designed for challenging mining, construction, and industrial applications.
2670.180
Drainage pump
Liquid Density: 9.2 lb. per US gal. (1100 kg/m³) · Strainer Hole Dimension: ø 0.47” (12.0 mm) · pH of Pumped Liquid: pH 5–8
The Flygt 2670 is a portable high-head or medium-head pump designed for challenging applications.
7045
Propeller pump
Flow: Up to 7200 l/s or 120,000 USgpm · Power ratings: Up to 578 kW or 775 hp · Rating, kW at 50 Hz: 11–22
The Flygt 7045 is a submersible propeller pump designed for cost-effective transport of large volumes of water at low heads.
7061
Propeller pump
Optional monitoring channels via power analyzer PAN 312: Three-phase power, Power factor, System voltage, Voltage imbalance, Pump current, Current imbalance · Liquid temperature: Max. +40°C (+105°F) · pH of pumped liquid: pH 5.5–14
The Flygt 7061 is a large submersible propeller pump designed for moving high volumes of water at low heads in column installations.
4410
Slow Speed Mixer
Shaft Power (50 Hz): 0.75-2.2 kW · Shaft Power (60 Hz): 1.0-3.0 hp · Max. Nominal Thrust (50 Hz): 1.0-2.0 kN
The Flygt 4410 is a submersible mixer featuring a clog-free Banana Blade propeller for efficient mixing in applications like biological treatment and sludge holding.
CS/DS-3060.390
Submersible pump
Heads: Up to 90 ft · Speed: 3400 rpm · pH Range: 3-14
The CS/DS-3060.390 is a submersible solids handling pump designed for pumping water containing corrosive materials with a pH range of 3-14.
BS 2125.181
2000 Series dewatering Pump
Speed of rotation: 3400 rpm · Discharge connection: 3”, 4”, 5”, 6” · Liquid temperature: max +40° C
The Flygt 2125.181 is a submersible dewatering pump designed for tough operating conditions.
BS 2125.320
2000 Series dewatering Pump
Speed of Rotation: 3480 rpm · Discharge Connection: 3”, 4” · Liquid Temperature: max +40° C
The Flygt 2125.320 is a heavy-duty dewatering pump designed for abrasive liquids, sediment, and challenging conditions. It features a cast iron outer casing.
BS 2201.011
2000 Series dewatering Pump
Discharge connection: 4”, 6”, 8” · Liquid temperature: max +40° C · pH of the pumped liquid: pH 5 - 8
The Flygt 2201.011 is a submersible dewatering pump designed for tough conditions, capable of handling liquids with abrasive solids such as clay, stone chips.
BS 2201.320
2000 Series dewatering Pump
Speed of Rotation: 3430 rpm · Liquid Temperature: max +40° C · pH of Pumped Liquid: pH 6 –13
The Flygt 2201.320 is a submersible pump designed for heavy-duty dewatering in tough conditions, capable of handling abrasive and corrosive liquids.
BS 2250.011
2000 Series dewatering Pump
Power: 65 kW · Speed of rotation: 1770 rpm · Discharge connection: 6”, 8”, 10”
The Flygt 2250.011 is a submersible dewatering pump designed for tough operating conditions and high sediment content. This 65 kW pump features an aluminum outer casing.
2400.402
2000 Series dewatering Pump
Speed of rotation: 3560 rpm · Discharge connection: 4”, 6” · Frequency: 60 Hz
The Flygt 2400.402 is a dewatering pump designed for tough conditions, handling liquids with high solids, abrasives, and corrosive elements.
Ready 4
Submersible / Dewatering
Flow rates: Up to 7 l/s · Heads: Up to 14 m · Rated power [kW]: 0.42
The Flygt Ready 4 is a submersible drainage pump designed for demanding tasks with contaminated water containing sand and gravel.
Ready 8
Submersible / Dewatering
Power Ratings: From 0.4 to 0.9 kW (general for series) · pH range: 5–8 · Frequency: 50 Hz
The Flygt Ready 8 is a submersible dewatering pump designed for construction, industrial sites, and emergency use.
KS 2610
2600 Series dewatering Pump
Liquid density: 9.2 lb. per US gal. (1100 kg/m³) · Strainer hole dimension: 0.29” (ø 7.5 mm) · pH of the pumped liquid: pH 5–8
The Flygt 2610 is a portable dewatering pump featuring an open impeller, Class F motor, and Spin-Out™ technology for seal protection.
BS/KS 2620.172
2600 Series dewatering Pump
Pump dimensions: 9½” W (max.) x 25” H (max.) · Max. weight: 66 lbs · pH Range (Stainless Steel 2700 Series): Ideal for pH values between 2 and 10
The Flygt BS/KS 2620.172 is a submersible dewatering pump designed for heavy-duty applications.
CS/FS-3068 (SS)
3000 Series Sludge and Solids-Handling Sewage Pumps (SS)
Liquid temperature: Maximum 40°C (104°F) · Liquid temperature, warm water version: Maximum 70°C (158°F) (Note: This option is not listed for M-pump 3068.175) · Liquid density: Maximum 1100 kg/m³
The Flygt CS/FS-3068 (SS) is a submersible pump available in various configurations for dewatering, wastewater, or sludge applications.
BS 2720.390 (SS)
2700 Series dewatering Pumps (SS)
Speed of rotation: 2 680 rpm · Discharge connection: 3’’ · Frequency: 50 Hz
The Flygt BS 2720 is a corrosion-resistant drainage pump designed for efficient wastewater removal. It features a slim.
BS 2740.390 (SS)
2700 Series dewatering Pumps (SS)
Speed of rotation: 2 840 rpm · Liquid temperature: max +40 °C · Liquid density: max 1100 kg/m³
The Flygt BS 2740 is a corrosion-resistant drainage pump optimized for extreme environments with unpredictable pH variance.
BS 2750.390 (SS)
2700 Series dewatering Pumps (SS)
Speed of Rotation: 2 855 rpm · Range: Flygt 2700 pump range · Liquid temperature: max +40 °C
The Flygt BS 2750.390 is a corrosion-resistant drainage pump from the 2700 range, designed for submersible installation.
BS/KS 2830
BIBO 2800 Dewatering Pump
Power: 5.9 hp · Liquid Density: 9.2 lb. per US gal. (1100 kg/m³) · Strainer Hole Dimension: ø 0.39” (10.0 mm)
The Flygt BS/KS 2830 is a portable, 5.9 hp, 3-phase submersible pump designed for high head or medium head applications.
BS/KS 2840
BIBO 2800 Dewatering Pump
Liquid temperature: 40°C (standard) · Liquid density: max 1100 kg/m³ · Strainer hole dimension: ø 10.0 mm
The Flygt BIBO 2840 is a portable submersible pump designed for demanding applications. It features a class H motor, wear-resistant Hard-Iron impeller.
BS/KS 2860
BIBO 2800 Dewatering Pump
Liquid density: 9.2 lb. per US gal. (1100 kg/m³) · Strainer hole dimension: ø 0.39” (10.0 mm) · pH of the pumped liquid: pH 5–8
The Flygt BIBO 2860 is a portable dewatering pump designed for demanding mining, quarrying, and construction applications.
BS/KS 2870
BIBO 2800 Dewatering Pump
Liquid temperature: max 104°F (40°C), standard · Liquid density: 9.2 lb. per US gal. (1100 kg/m³) · Strainer hole dimension: ø 0.47” (12.0 mm)
This Flygt BIBO 2870 is a portable dewatering pump designed for challenging mining and construction applications.
HS 5100.211
5000 Series Heavy-Duty Slurry Pump
Selection cues: flow · head · power and wetted-part materials
The Flygt HS 5100.211 is an abrasion-resistant submersible slurry pump designed for pumping abrasive fluids, offering high wear resistance and dependability.
HS 5100.251
5000 Series Heavy-Duty Slurry Pump
Selection cues: flow · head · power and wetted-part materials
The Flygt HS 5100.251 is an abrasion-resistant submersible slurry pump designed for high wear applications. It features a Class H motor.
HS 5100.300
5000 Series Heavy-Duty Slurry Pump
Selection cues: flow · head · power and wetted-part materials
This is an abrasion-resistant submersible slurry pump designed for high wear resistance and dependability. It features a high-chrome cast iron impeller and volute.
HS 5150.300
5000 Series Heavy-Duty Slurry Pump
Protection: Built-in thermal sensors for additional motor overload protection
The Flygt HS 5150.300 is a submersible pump designed for abrasive slurry applications, offering high wear resistance and dependability.
HS 5150.350
5000 Series Heavy-Duty Slurry Pump
Selection cues: flow · head · power and wetted-part materials
The Flygt HS 5150.350 is an abrasion-resistant submersible slurry pump designed for high wear resistance and utmost dependability. It features a cast iron pump housing.
HS 5520.180
5000 Series Heavy-Duty Slurry Pump
Selection cues: flow · head · power and wetted-part materials
This is an abrasion-resistant submersible slurry pump designed for high wear resistance and dependability. It features a high-chrome cast iron impeller.
HS 5530.181
5000 Series Heavy-Duty Slurry Pump
Liquid temperature: Max. 40°C (105°F). Versions for liquid temperatures up to 70°C are available, with specific operational limitations stated on the pump plate · pH of pumped liquid: 6—14 · Voltage imbalance: Designed to operate with a voltage imbalance of up to 2 % between the phases
The Flygt HS 5530.181 is a submersible electric pump designed for pumping water containing abrasive particles, sludge, groundwater, or light slurries.
HS 5570.180
5000 Series Heavy-Duty Slurry Pump
Selection cues: flow · head · power and wetted-part materials
The Flygt HS 5570.180 is an abrasion-resistant submersible slurry pump designed for high wear applications.
C 3127.182
C-pump
Flow Rate: Up to approx. 3000 l/s · Materials: Standard version in cast iron; industrial configurations available for more demanding applications · Seal Protection: Spin-out™ is a patented design that protects the outer seal by expelling abrasive particles from the seal chamber
These Flygt C-pumps are submersible units designed for waste and raw water applications. They feature Class H insulation, two sets of independent mechanical shaft seals.
D 3127.182
D-pump
Power supply: 3-phase · Liquid temperature: Maximum 40°C (104°F) · Liquid temperature, warm water version: Maximum 70°C (158°F)
The Flygt 3127.182 is a submersible D-pump with a vortex hydraulic design, suitable for liquids containing solids and abrasive media or light wastewater.
D 2720
D-pump
Rating, hp (kW): 3.1 (2.3) · Discharge Ø, in (mm): 3" (76) · Height, in (mm): 28" (715)
The Flygt D 2720 is a corrosion-resistant submersible dewatering pump designed for tough sludge and contaminated water jobs.
N 3127.160
N-pump
Flow Rates: Up to 16,000 US GPM (1,000 l/s) · Heads: Up to 400 ft (120 m) · Power Ratings: 2.2 hp to 870 hp
The Flygt N 3127.160 is a self-cleaning pump designed for sustained high efficiency in wastewater, stormwater, and industrial effluent applications. This model.
P 7045 7055 7050
P-pump
Liquid temperature: Max. +40°C (+105°F) · pH of pumped liquid: pH 5.5–14 · Liquid density: Max. 1100 kg/m³ (9.17 lb per gal.)
The P7045, P7050, and P7055 are large submersible propeller pumps designed for transporting large volumes of water at low heads.
P 7020 7040
P-pump
Liquid temperature: Max. +40°C (+105°F) · pH of pumped liquid: pH 5.5–14 · Liquid density: Max. 1100 kg/m³ (9.17 lb per gal.)
The P 7020 and P 7040 are submersible propeller pumps designed for high-volume water transport at low heads.
Brand Products & Technical Documents
53 product profiles with integrated document access
Each card keeps the curated model introduction and combines the readable datasheet page, OEM PDF, and official source. Product understanding and document access now share one card set.
Jet mixers
1 product profile
Pumps & Pumping
Product profile
JT4710
The Flygt JT 4710 is a jet mixer designed for contaminated water and sludge, featuring an engineered ejector system and a dry-installed Flygt N-pump.
Concertor
4 product profiles
Pumps & Pumping
Product profile
Concertor DP N80-7800
The Concertor DP N80-7800 is a process-controlled wastewater pumping system featuring integrated gateways and specialized control algorithms.
Pumps & Pumping
Product profile
Concertor DP N100-7800
The Concertor DP N100-7800 is a process-controlled wastewater pumping system featuring a grey cast iron impeller and a semi-permanent installation type.
Pumps & Pumping
Product profile
Concertor DP N150-5850
The Concertor DP N150-5850 is a process-controlled wastewater pumping system featuring multiple pumps and a gateway per pump.
Pumps & Pumping
Product profile
XPC
The Concertor™ N/EA/DP series are intelligent wastewater pumping systems designed for sustained high efficiency. These pumps.
3000 Series Heavy-duty Sewage pump (Rental)
2 product profiles
Pumps & Pumping
Product profile
NS 3315.090
The Flygt N-pump Series offers self-cleaning submersible pumps designed for high efficiency in wastewater, stormwater, and industrial effluent applications.
Pumps & Pumping
Product profile
CS 3400/805
The Flygt CS 3400/805 is a submersible waste and raw water pump designed for municipal sewage, irrigation, and industrial applications.
Compact pump
2 product profiles
Pumps & Pumping
Product profile
CP 3045 HT
The Flygt CP 3045 HT is a submersible C-pump designed for high-head applications with clean water or light wastewater.
Pumps & Pumping
Product profile
CP 3057 HT
The Flygt 3057 HT is a submersible pump designed for wastewater, sludge, and groundwater applications.
Pressure sewage pump
2 product profiles
Pumps & Pumping
Product profile
C 3045
The Flygt 3045 is a submersible pump available in C-pump (high head) and D-pump (medium head vortex) models for various liquid types and installation configurations.
Pumps & Pumping
Product profile
M 3102
The Flygt 3102 series offers submersible pumps for various wastewater and fluid transfer applications, with specialized C, D, F, M, and N pump types available.
Drainage pump
5 product profiles
Pumps & Pumping
Product profile
2620.170
The Flygt 2600 series pump is a portable unit designed for medium head applications. It features a wear-resistant Hard-Iron impeller with Dura-Spin™ technology and a...
Pumps & Pumping
Product profile
2630.180
The Flygt 2630 is a portable, 3-phase submersible pump designed for high head or medium head applications.
Pumps & Pumping
Product profile
2640.180
This Flygt 2640 series pump is a portable unit designed for dewatering applications, featuring a 3-inch discharge and a 5.6 kW, 3-phase motor.
Pumps & Pumping
Product profile
2660.180
The Flygt 2660 is a portable dewatering pump designed for challenging mining, construction, and industrial applications.
Pumps & Pumping
Product profile
2670.180
The Flygt 2670 is a portable high-head or medium-head pump designed for challenging applications.
Propeller pump
2 product profiles
Pumps & Pumping
Product profile
7045
The Flygt 7045 is a submersible propeller pump designed for cost-effective transport of large volumes of water at low heads.
Pumps & Pumping
Product profile
7061
The Flygt 7061 is a large submersible propeller pump designed for moving high volumes of water at low heads in column installations.
Slow Speed Mixer
1 product profile
Pumps & Pumping
Product profile
4410
The Flygt 4410 is a submersible mixer featuring a clog-free Banana Blade propeller for efficient mixing in applications like biological treatment and sludge holding.
Submersible pump
1 product profile
Pumps & Pumping
Product profile
CS/DS-3060.390
The CS/DS-3060.390 is a submersible solids handling pump designed for pumping water containing corrosive materials with a pH range of 3-14.
2000 Series dewatering Pump
6 product profiles
Pumps & Pumping
Product profile
BS 2125.181
The Flygt 2125.181 is a submersible dewatering pump designed for tough operating conditions.
Pumps & Pumping
Product profile
BS 2125.320
The Flygt 2125.320 is a heavy-duty dewatering pump designed for abrasive liquids, sediment, and challenging conditions. It features a cast iron outer casing.
Pumps & Pumping
Product profile
BS 2201.011
The Flygt 2201.011 is a submersible dewatering pump designed for tough conditions, capable of handling liquids with abrasive solids such as clay, stone chips.
Pumps & Pumping
Product profile
BS 2201.320
The Flygt 2201.320 is a submersible pump designed for heavy-duty dewatering in tough conditions, capable of handling abrasive and corrosive liquids.
Pumps & Pumping
Product profile
BS 2250.011
The Flygt 2250.011 is a submersible dewatering pump designed for tough operating conditions and high sediment content. This 65 kW pump features an aluminum outer casing.
Pumps & Pumping
Product profile
2400.402
The Flygt 2400.402 is a dewatering pump designed for tough conditions, handling liquids with high solids, abrasives, and corrosive elements.
Submersible / Dewatering
2 product profiles
Pumps & Pumping
Product profile
Ready 4
The Flygt Ready 4 is a submersible drainage pump designed for demanding tasks with contaminated water containing sand and gravel.
Pumps & Pumping
Product profile
Ready 8
The Flygt Ready 8 is a submersible dewatering pump designed for construction, industrial sites, and emergency use.
2600 Series dewatering Pump
2 product profiles
Pumps & Pumping
Product profile
KS 2610
The Flygt 2610 is a portable dewatering pump featuring an open impeller, Class F motor, and Spin-Out™ technology for seal protection.
Pumps & Pumping
Product profile
BS/KS 2620.172
The Flygt BS/KS 2620.172 is a submersible dewatering pump designed for heavy-duty applications.
3000 Series Sludge and Solids-Handling Sewage Pumps (SS)
1 product profile
Pumps & Pumping
Product profile
CS/FS-3068 (SS)
The Flygt CS/FS-3068 (SS) is a submersible pump available in various configurations for dewatering, wastewater, or sludge applications.
2700 Series dewatering Pumps (SS)
3 product profiles
Pumps & Pumping
Product profile
BS 2720.390 (SS)
The Flygt BS 2720 is a corrosion-resistant drainage pump designed for efficient wastewater removal. It features a slim.
Pumps & Pumping
Product profile
BS 2740.390 (SS)
The Flygt BS 2740 is a corrosion-resistant drainage pump optimized for extreme environments with unpredictable pH variance.
Pumps & Pumping
Product profile
BS 2750.390 (SS)
The Flygt BS 2750.390 is a corrosion-resistant drainage pump from the 2700 range, designed for submersible installation.
BIBO 2800 Dewatering Pump
4 product profiles
Pumps & Pumping
Product profile
BS/KS 2830
The Flygt BS/KS 2830 is a portable, 5.9 hp, 3-phase submersible pump designed for high head or medium head applications.
Pumps & Pumping
Product profile
BS/KS 2840
The Flygt BIBO 2840 is a portable submersible pump designed for demanding applications. It features a class H motor, wear-resistant Hard-Iron impeller.
Pumps & Pumping
Product profile
BS/KS 2860
The Flygt BIBO 2860 is a portable dewatering pump designed for demanding mining, quarrying, and construction applications.
Pumps & Pumping
Product profile
BS/KS 2870
This Flygt BIBO 2870 is a portable dewatering pump designed for challenging mining and construction applications.
5000 Series Heavy-Duty Slurry Pump
8 product profiles
Pumps & Pumping
Product profile
HS 5100.211
The Flygt HS 5100.211 is an abrasion-resistant submersible slurry pump designed for pumping abrasive fluids, offering high wear resistance and dependability.
Pumps & Pumping
Product profile
HS 5100.251
The Flygt HS 5100.251 is an abrasion-resistant submersible slurry pump designed for high wear applications. It features a Class H motor.
Pumps & Pumping
Product profile
HS 5100.300
This is an abrasion-resistant submersible slurry pump designed for high wear resistance and dependability. It features a high-chrome cast iron impeller and volute.
Pumps & Pumping
Product profile
HS 5150.300
The Flygt HS 5150.300 is a submersible pump designed for abrasive slurry applications, offering high wear resistance and dependability.
Pumps & Pumping
Product profile
HS 5150.350
The Flygt HS 5150.350 is an abrasion-resistant submersible slurry pump designed for high wear resistance and utmost dependability. It features a cast iron pump housing.
Pumps & Pumping
Product profile
HS 5520.180
This is an abrasion-resistant submersible slurry pump designed for high wear resistance and dependability. It features a high-chrome cast iron impeller.
Show remaining 5000 Series Heavy-Duty Slurry Pump profiles (2)
Pumps & Pumping
Product profile
HS 5530.181
The Flygt HS 5530.181 is a submersible electric pump designed for pumping water containing abrasive particles, sludge, groundwater, or light slurries.
Pumps & Pumping
Product profile
HS 5570.180
The Flygt HS 5570.180 is an abrasion-resistant submersible slurry pump designed for high wear applications.
C-pump
1 product profile
Pumps & Pumping
Product profile
C 3127.182
These Flygt C-pumps are submersible units designed for waste and raw water applications. They feature Class H insulation, two sets of independent mechanical shaft seals.
D-pump
2 product profiles
Pumps & Pumping
Product profile
D 3127.182
The Flygt 3127.182 is a submersible D-pump with a vortex hydraulic design, suitable for liquids containing solids and abrasive media or light wastewater.
Pumps & Pumping
Product profile
D 2720
The Flygt D 2720 is a corrosion-resistant submersible dewatering pump designed for tough sludge and contaminated water jobs.
N-pump
1 product profile
Pumps & Pumping
Product profile
N 3127.160
The Flygt N 3127.160 is a self-cleaning pump designed for sustained high efficiency in wastewater, stormwater, and industrial effluent applications. This model.
P-pump
3 product profiles
Pumps & Pumping
Product profile
P 7045 7055 7050
The P7045, P7050, and P7055 are large submersible propeller pumps designed for transporting large volumes of water at low heads.
Pumps & Pumping
Product profile
P 7020 7040
The P 7020 and P 7040 are submersible propeller pumps designed for high-volume water transport at low heads.
Pumps & Pumping
Product profile
P 7076
The P 7076 is a submersible propeller pump designed for transporting large volumes of clean surface or storm water at low heads.