KSB Pumps

Media Density (ρ): Total heads and performance characteristics apply to media with a density ρ = 1.0 kg/dm³. If the density is ≠ 1.0, the performance must be multiplied by ρ · Kinematic Viscosity (ν): Up to 20 mm²/s. For viscosities > 20 mm²/s, cold water data must be calculated, and the effect on pump performance determined

The KSB CPKN is a pump designed for various industrial applications, available in many sizes and operating at 50 Hz with nominal speeds of 960, 1450, or 2900 rpm.

Flow rate (Q): Up to 900 m³/h · Head (H): Up to 150 m · Material V: EN 1092-1 PN 16, Drilled to ASME B16.5 Class 150 (DN32 flanges drilled 1 1/2 in.)

The KSB CPKNO is a series of standardized centrifugal chemical pumps with a back pull-out design suitable for aggressive liquids and polymerizing fluids.

Rated Power: 0.55 kW to 45 kW · Nominal Power: 110 kW (standard) or 1400 kW (on request) · Rated Speed: 1500 rpm or 3000 rpm

The KSB Etabloc is a close-coupled centrifugal pump designed for various fluid handling applications including water supply and cooling circuits.

Flow: 280/337 m³/h · Head: 68/99 m · Operating pressure up to: 16 bar

The Etabloc SYT is a pump designed for thermal oil and hot water applications, suitable for heat transfer systems and hot water circulation.

Hexagon head bolt: Steel 8.8 A2A · Rated Power: 0.55 kW to 45 kW · Nominal Power: 110 kW (standard) or 1400 kW (on request)

The KSB Etachrom L is a close-coupled, single-stage pump designed to EN 733 for various water and fluid handling applications.

Hexagon head bolt: Steel 8.8 A2A · Fluid temperature T: ≥ -30 °C to ≤ +110 °C · Operating pressure p: ≤ 12 bar (The sum of inlet pressure and shut-off head must not exceed the value indicated.)

The KSB Etachrom B is a series of closed-coupled, standardized pumps designed for a wide range of applications including water treatment, supply, and general industry.

Hexagon head bolt: Steel 8.8 A2A · Rated Power: 0.55 kW to 45 kW · Nominal Power: 110 kW (standard) or 1400 kW (on request)

The KSB Etachrom L is a range of standardized, close-coupled single-stage pumps designed to EN 733, suitable for various water and industrial applications.

Head (H): ≤ 160 m (both 50 Hz and 60 Hz) · Rated power: 0.55 kW to 45 kW · Rated speed: 1500 rpm or 3000 rpm

The KSB Etanorm is a series of standardized, horizontal, back-pull-out, single-stage volute casing centrifugal pumps with shaft seals for European, Middle Eastern.

Rated power: 0.55 kW to 45 kW · Rated speed: 1500 rpm or 3000 rpm · Material variant SC1: 60 m/s

The KSB Etanorm-RSY is a long-coupled, volute casing centrifugal pump designed for handling thermal oil up to 350°C or hot water up to 180°C.

Rated power: 0.55 kW to 45 kW · Extended power range: 110 kW (standard) or 1400 kW (on request) · Rated speed: 1500 rpm or 3000 rpm

The KSB Etanorm SYT is a series of horizontal, back-pull-out centrifugal pumps designed for handling thermal oil and hot water.

Rated Power: 0.55 kW to 45 kW · PumpDrive R Extended Power Range: 110 kW (standard) or 1400 kW (on request) · Rated Speed: 1500 rpm or 3000 rpm

The Etanorm V is a vertical, single-stage centrifugal pump designed for installation in closed tanks under atmospheric pressure.

Heads (H): up to 225 m · Operating pressures (p): up to 110 bar · Operating temperatures (t): up to +320 °C

The KSB HPH is a hot water circulating pump designed for high-pressure hot water generating plants. These pumps feature a horizontal.

Selection cues: flow · head · power and wetted-part materials

The KSB HPK-L is a horizontal, back-pull-out centrifugal volute casing pump designed for handling hot water and heat transfer fluids in various heating and circulation...

Fluid temperature: -90 °C to +400 °C · Operating pressure: Up to 40 bar

The Magnochem is a standardized chemical pump featuring a magnetic coupling and available in W, D, and -Bloc variants for various industrial applications.

Materials testing: Test report 2.2 on request · Materials: Stainless steel (C, V), Cast steel (E, Y), Duplex stainless steel (D) · Fluid temperature T1: ≥ -20 °C to ≤ +200 °C (Higher/lower values on request)

The KSB Magnochem-Bloc is a seal-less, close-coupled volute casing pump designed for handling aggressive, explosive.

Flow rate (Q): ≤ 8 m³/h (≤ 2.2 l/s) · Head (H): ≤ 54 m · Operating pressure (pd): ≤ 10 bar or ≤ 6 bar, depending on the specific size

The KSB MultiEco is a self-priming, close-coupled, multistage centrifugal pump designed for domestic water supply and general water transfer applications.

Minimum flow velocity in vertical risers: Between 1.2 m/s (for nominal size 100) and 2.4 m/s (for nominal size 1000) · Minimum circumferential speed of impeller: 12 m/s (except for F impellers, where lower speeds are permissible) · EN-GJL-250 grey cast iron (Material variant G): Suitable for neutral, slightly aggressive fluids with little wear. pH ≥ 6.5, sand content ≤ 0.5 g/l

The KSB Sewabloc is a close-coupled, dry-installed volute casing pump designed for various wastewater applications. It features a shaft seal.

Max. head: 270 m / 886 ft · Materials: S5, S6, S8, C6, A8, D1, D2 and special materials · Max. temperature: -70 °C to +450 °C / -94 °F to 842 °F

The KSB RPH is a heavy-duty, single-stage, single-suction OH2 process pump designed to API 610 / ISO 13709 for demanding refinery and petrochemical applications.

Max. head: 270 m / 886 ft · Max. temperature: +320 °C / +608 °F · Max. pressure: 110 bar / 1595 psi

The RPH-HW is a hot water recirculation pump designed for industrial plants and power generation.

Max. flow rate: 40 m³/h / 176 US gpm · Materials: S5, S6, S8, C6, A8, D1 and special materials · Max. temperature: -30 to +200 °C / -20 °F to 392 °F

The KSB RPH-LF is a single-suction, single-stage OH2 process pump designed to API 610 standards for refineries and chemical industries.

Materials: S5, S6, S8, C6, A8, D1, D2 and special materials · Max. temperature: -80 °C to +450 °C / -112 °F to 842 °F · Max. pressure: 100 bar / 1450 psi

The KSB RPHb is a heavy-duty, single-suction, two-stage process pump designed to API 610 standards for refinery and petrochemical applications.

Max. temperature: -80 °C to +450 °C / -112 °F to 842 °F · Max. pressure: Up to 100 bar / 1450 psi · Nominal diameter: 80-250 mm / 3-10 in

The KSB RPHbd is a heavy-duty, double-suction, two-stage process pump designed to API 610 standards for refineries and petrochemical applications.

Flow rate (Q): Up to 2500 m³/h / 11008 gpm · Head (H): Up to 150 m / 492 ft · Materials testing: Test report 2.2 on request, Test report 3.1 on request

The KSB RPH-RO is a single-stage, horizontal, process volute casing pump designed for reverse osmosis water desalination systems.

Materials: S-5, S-6, S-8, C-6, A-8, D-1 · Max. pressure: 35 bar / 508 psi · Max. temperature: -30 °C to -274 °C / -22 °F to -461 °F

The KSB RPH-V is a heavy-duty, vertical, single-stage sump pump designed for chemical and petrochemical applications, meeting API 610 standards.

Operating Temperature Range: -10 ºC to 100 ºC · Operating Pressure, max: 16 bar · Max. Length of Submerged Pipe: 5785 mm

The KSB RWCP/RWCN are vertical centrifugal pumps designed for wells, ditches, and tanks, handling neutral to aggressive liquids with significant solid content.

Max. head: 600 m / 1958 ft · Max. pressure: 51 bar / 740 psi · Max. temperature: -45 to +250 °C / -49 to 782 °F

The KSB WKB-E is a vertical, heavy-duty single-casing pump designed to API 610 standards for critical applications.

Head (H) at Qmin, ρ=1000 kg/m³: up to 340 m · Speed (n): up to 1800 min⁻¹ · Capacity (Q): up to 1800 m³/h

The KSB WKT is a vertical, can-type, multistage ring-section pump designed for handling condensate in power stations and industrial plants.

Connections: Connecting dimensions to DIN EN or ASME

The KSB WKTB is a multistage, vertical ring-section pump designed for condensate transport.

Total head (H): Up to 500 m · Speed (n): Up to 3600 rpm · Capacity (Q): Up to 111 l/s (400 m³/h)

The WKTR is a vertical, high-pressure centrifugal pump designed per API 610 10th edition, Category VS6, for hydrocarbons and ammonia handling. This radially split.

Flow Rate (Q): ≤ 10.8 m³/h · Head (H): ≤ 79.5 m · Fluid Temperature (T): ≥ -10 °C to ≤ +60 °C

The KSB Comeo is a horizontal, close-coupled multistage centrifugal pump designed for clean or slightly aggressive fluids.

Flow rate Q: ≤ 27 m³/h · Flow: 27 m³/h · Head H: ≤ 195 m

The Movitec H(S)I is a horizontal, multistage centrifugal pump designed for high-pressure applications with a flow rate up to 27 m³/h and head up to 195 m.

Flow rate (Q): ≤ 22.5 m³/h · Head (H): ≤ 249 m · Minimum flow rate (Qmin): Varies by pump size and frequency. See the official PDF for exact tabulated values

The KSB Movitec VCI is a vertical, multistage, high-pressure immersion centrifugal pump designed for machine tools, industrial washing machines, and condensate transport.

Rated power: 0.55 kW to 45 kW · PumpDrive R extended power range: 110 kW (standard) or 1400 kW (on request) · Rated speed: 1500 rpm or 3000 rpm

The KSB Etaline is an in-line pump designed for various water supply, heating, and industrial recirculation systems, available in fixed and variable speed versions.

Flow rate (Q): ≤ 63.6 m³/h (≤ 18 l/s) · Head (H): ≤ 42.9 m · Internal power supply: 24 V DC

The KSB EtaLine Pro is a fully integrated, close-coupled, single-stage in-line pump for various water supply, heating, and industrial recirculation systems.

Rated power: 0.55 kW to 45 kW · Nominal power: 110 kW (standard) or 1400 kW (on request) · Speed limit: Max. 4400 rpm, Min. 800 rpm (specific to pump size, see official PDF)

The KSB Etaline SYT is an in-line, single-stage centrifugal pump designed for thermal oil and hot water circulation in various industrial applications.

Hexagon head bolt (901): 8.8, A4-70 · Fluid temperature Tmax: ≤ +70 °C · Frequency: 50 Hz / 60 Hz

The KSB ILN series comprises vertical, single-stage, in-line centrifugal pumps designed for applications including heating, cooling, and water supply systems.

Head, max: 52 m (at 50 Hz and 60 Hz) · Operating speed, max: 3000 rpm (at 50 Hz), 3600 rpm (at 60 Hz) · Standard Material Combination: Q1BPGG, VBPGG, U3U3VGG

The KSB AU series are self-priming centrifugal pumps designed for handling dirty water with solids up to 45 mm.

Geodetic Head (Hgeo): ≤ 9 m · Fluid Temperature (T): ≥ -30 °C to ≤ +90 °C · Operating Pressure (p): ≤ 10 bar

The KSB Etaprime B is a close-coupled, self-priming volute casing pump designed for horizontal installation.

Fluid temperature (T): ≥ -30 °C to ≤ +90 °C · Operating pressure (p): ≤ 10 bar · Maximum discharge-side operating pressure: 10.0 bar (The sum of inlet pressure and shut-off head must not exceed this value.)

The KSB Etaprime L is a self-priming, single-stage, single-suction volute casing pump designed for reliable fluid transfer.

Rated power: 0.55 kW to 45 kW · Nominal power: 110 kW (standard) or 1400 kW (on request) · Rated speed: 1500 rpm or 3000 rpm

The KSB Vitaprime is a hygienic, self-priming side channel pump for horizontal installation in food, beverage, and chemical industries.

Fluid temperature (T): ≥ -40 °C to ≤ +400 °C · Operating pressure (p): ≤ 40 bar

The KSB MegaCPK is a single-stage, horizontal centrifugal chemical pump designed with a back pull-out configuration and meeting ISO 5199 standards.

Selection cues: flow · head · power and wetted-part materials

The KSB RHR is a pump designed for various fluid-handling applications.

Flow rates (Q): ≤ 850 m³/h (≤ 236 l/s) · Heads (H): ≤ 630 m (up to 1000 m for individual sizes/designs) · Seal face materials: Carbon graphite (antimony- or resin-impregnated), Silicon carbide (solid, sintered without pressure, or shrink-fitted), Tungsten carbide (Ni-bonded or NiCrMo-bonded)

The KSB Multitec is a high-pressure, multistage centrifugal pump designed for water supply, industrial applications, and more.

Head (H): ≤ 1000 m (only for individual sizes/designs) · Material: PTFE-impregnated polyacryl · Operating pressure (p₂): ≤ 100 bar (the sum of inlet pressure and shut-off head must not exceed the value indicated, only for individual sizes/designs)

The KSB Multitec E/F/V RO is a high-pressure multistage centrifugal pump designed for applications such as water supply and pressure boosting.

Flow rate Q: ≤ 24 m³/h (≤ 6.67 l/s) · Head H: ≤ 14 m · Head: Float switches with free cable ends in 5 m, 10 m, and 20 m lengths, suitable for fluid temperatures up to 70 °C

The KSB Rotex is a series of single-stage centrifugal pumps designed for handling grey water and condensate in disposal, heating, and drainage systems.

Heads (H): Up to 100 m · Product temperature (t): -40 to 140 °C · Maximum operating pressure: 16 bar

The KSB Etaseco is a sealless, fully enclosed canned motor pump designed for aggressive, inflammable, toxic, volatile.

Flow rate: Up to 8 m³/h (133 l/min) · Head: Up to 65 m · Fluid temperature: Up to +35 °C

The KSB Ixo N is a submersible borehole pump designed for various water supply, irrigation, and extraction applications.

Head (H): ≤ 60 m · Power cable: H07RNF, 15 m length, includes plug · Fluid temperature (T): ≥ +5 °C to ≤ +40 °C

The KSB Ixo Pro is a multistage submersible borehole pump designed for rainwater harvesting, pressure boosting, and water extraction.

Max. fluid temperature: 50 °C (122 °F) · Efficiency: Consistently high efficiencies through optimised hydraulic design, leading to low operating costs

The KSB UPA 200 is a submersible borehole pump designed for applications such as water supply, irrigation, and industrial water handling. Available in cast iron, bronze.

Flow rate (Q): ≤ 79 m³/h (≤ 22 l/s) · Head (H): ≤ 440 m · Rated power: From 0.37 kW up to 2000 kW

The KSB UPA 150C is a submersible borehole pump designed for applications including irrigation, pressure boosting, and water supply.

Power cable: H 07 RN-F.G. or H 05 RN8-F.G. (depending on model and length, e.g., 5 m or 10 m) · Material variant C: Chrome nickel molybdenum steel (1.4571) · Fluid temperature: 0 to 50 °C (continuous)

The KSB Ama-Drainer N is a submersible wastewater pump available in multiple models for drainage, groundwater maintenance, and general disposal applications.

Free-flow impeller (Type F): Suitable for fluids containing solids and stringy material, as well as fluids with entrapped air or gas · Fluid temperature t: max. +40°C (+70°C for short periods) · Maximum temperature of fluid handled: 40 °C (for motor versions SE, NE, ND)

The KSB Ama-Porter is a fully floodable submersible motor pump designed for drainage and wastewater applications, available with free-flow or cutter impellers.

Flow rate (Q): ≤ 320 m³/h (≤ 89 l/s) · Head (H): ≤ 42 m · Hexagon socket head cap screw: A4

The KSB Amarex is a submersible motor pump designed for wastewater transport, drainage, and treatment plant applications.

Minimum flow velocity in vertical risers: 1.2 m/s (for DN 100) to 2.4 m/s (for DN 1000) · Head (H): ≤ 120 m · Minimum circumferential speed of impeller: 12 m/s (except for F impellers)

The Amarex KRT is a fully floodable, non-self-priming submersible motor pump designed for waste water management, service water supply.

Flow rate (Q): ≤ 190 m³/h (≤ 53 l/s) · Head (H): ≤ 49 m · Power input (P1): 1.29 - 5.40 kW

The KSB Amarex N is a non-self-priming, submersible motor pump designed for versatile wastewater applications.

Flow rate (Q): ≤ 16 m³/h (≤ 4.4 l/s) · Head (H): ≤ 29 m · Power Cable: Rubber-sheathed cable (H07RN8-F 7G1.5²), available in 10 m and 20 m lengths

The KSB Amarex N S 32-160 is a submersible motor pump designed for handling domestic, raw, and grey wastewater.

Flow rate (Q): ≤ 300 m³/h (≤ 83.3 l/s) · Head (H): ≤ 35 m · Hexagon socket head cap screw: A4

The KSB Amarex Pro is a submersible motor pump designed for demanding waste water applications.

Head (H): ≤ 110 m (both 50 Hz and 60 Hz) · Materials inspection and testing: Test report 2.2 and inspection certificate 3.1 available on request · Fluid temperature (T): ≥ -30 °C to ≤ +100 °C (both 50 Hz and 60 Hz)

The KSB Estigia is a single-stage vertical immersion pump designed for closed tanks under atmospheric pressure, handling a wide range of inorganic and organic fluids.

Flow rate (Q): ≤ 36 m³/h (≤ 10 l/s) · Head (H): ≤ 21 m · Fluid temperature (T): ≤ +35 °C

The KSB Filtra N is a series of single-stage, self-priming centrifugal pumps designed for swimming pool filter systems.

Flow rate (Q): 2 - 36 m³/h (0.56 - 10 l/s) · Head (H): ≤ 19 m · Power (P2): 0.55 kW, 0.75 kW, 1.10 kW, 1.50 kW, 2.20 kW

The KSB MK series offers vertical, single-stage volute casing pumps for drainage, waste water, condensate, and heat transfer fluids.

Max. Head: 1000 m / 3280 ft · Max. Temperature: Up to 160 °C / 320 °F · Max Pressure: 100 bar / 1450 psi

The KSB HGM-S is a boiler feed pump for power stations and industrial plants, featuring a robust design with chrome steel impellers and diffusers.

Power Input (P1): Ranges from 6 W to 760 W, depending on the model · Fluid Temperature (T): -10 to +110 °C · Ambient Temperature (T): 0 to 40 °C

The KSB Calio is a high-efficiency, variable-speed circulator pump for building services, suitable for heating, ventilation, and cooling systems.

Head: H ≤ 12 m · Higher-viscosity fluids (water/glycol mixture up to a mixing ratio of 1: 1) · Fluid temperature: ≥ -10 °C to ≤ +110 °C

The KSB Calio Pro is a high-efficiency heating circulator pump with variable speed control, suitable for a wide range of HVAC and circulation systems.

Head in m x 10: For example, 4 m head is represented as 40 · Head (H): ≤ 6 m · Overall length: For example, 130 mm is represented as -130

The KSB Calio S is a high-efficiency circulator pump designed for heating, ventilation, air-conditioning, and circulation systems.

Flow rate (Q): ≤ 3.5 m³/h (≤ 1.0 l/s) · Head (H): ≤ 6 m · Fluid temperature (T): 2 - 95 °C

The KSB Calio-Therm S is a high-efficiency drinking water circulator pump designed for potable water and food/beverage industry applications. This maintenance-free.

Flow rate: up to 7000 m³/h (30820 gpm) · Head: up to 300 m (985 ft) · Pressure: up to 400 bar (40 MPa)

The KSB LUVA is a hermetically sealed boiler recirculation pump designed for hot water recirculation in fossil-fuelled and solar power plants.

Head: up to 300 m · Capacity: up to 7,000 m³/h · Operating pressure: up to 320 bar

The KSB LUVm pump is a hermetically sealed unit designed for reactor coolant and clean-up systems. It features a symmetrically forged.

Heads (H): up to 4000 m · Speeds (n): up to 6750 min⁻¹ · Capacity (Q): up to 1278 m³/h (355 l/s)

The KSB CHTC is a horizontal, multistage, barrel-type pump designed for high-pressure applications. It features radial impellers.

Head: up to 215 m (705 ft) · Speed: up to 1,800 min⁻¹ · Capacity: up to 24,000 m³/h (105,669 gpm)

The KSB RSR is a reactor coolant pump designed for pressurized water reactors, available in cast or forged configurations.

Head: up to 120 m (394 ft) · Speed: up to 1,800 min⁻¹ · Pressure: up to 175 bar (17.5 MPa (a))

The KSB RUV is a customized Reactor Coolant Pump for generation 3+ nuclear power stations.

Max. flow rate: 18 m³/s · Max. head: 25 m · Max. speed: 980 min⁻¹

The PHZ is a vertical tubular casing pump designed for applications such as desalination, power plant cooling, and water extraction in pumping stations.

Max. speed: 1,450 rpm · Max. fluid temperature: 60 °C (140 °F) · Dimensions: The special "Ever-Clean-Blade" protection of the hydraulic system prevents clogging of the propeller blades from fibers in the fluid

The KSB PNW is a vertical tubular casing pump designed for applications including irrigation, storm water handling, and raw water transport.

Flow rates: up to 31,700 gpm (up to 7,200 m³/h) · Total head: up to 165 ft (up to 50 m) · Pressure rating: up to 165 psi (up to 11 bar)

The KSB HVF is a High Volume Froth Pump designed for air-entrained slurries in mining and mineral processing applications.

Flow rates: up to 14,100 gpm (3,200 m³/h) · Total head: up to 300 ft (90 m) · Power rating: up to 750 Hp (560 kW)

The KSB LCC-H is a high-performance, wear-resistant slurry pump designed for applications with abrasive or corrosive slurries.

Flow rates: 100-110,000 gpm (20-25,000 m³/h) · Total head: up to 350 ft (105 m) · Pressure rating: up to 715 psi (up to 50 bar)

The KSB LHD is designed for low head, high flow applications within the GIW LSA Pump Series.

Flow rates: 100-110,000 gpm (20-25,000 m³/h) · Total head: up to 350 ft (105 m) · Pressure rating: up to 715 psi (up to 50 bar)

The KSB LSA pump series is a heavy-duty, abrasion-resistant pump designed for a wide range of demanding industrial applications like mineral processing and ash handling.

Flow rates: up to 16,500 m³/h (up to 72,650 gpm) · Total head: up to 51 m (up to 170 ft) · Pressure rating: up to 14.2 bar (up to 206 psi)

The KSB MDX is a heavy-duty slurry pump designed for severe mill duty applications such as SAG, ball, and rod mill discharge.

Nominal discharge nozzle diameter: 80 mm - 400 mm

The KSB Omega/Omega V is a single-stage, axially split volute casing pump designed for waterworks, desalination, and pressure boosting applications.

Nominal diameter of the discharge nozzles: 350 mm - 700 mm [14 inches - 28 inches]

The KSB RDLO is a single-stage, axially split volute casing pump designed for various water supply and transport applications.

Flow Rate (Q): 18,000 m³/h max. (79,260 gpm) · Head (H): 550 m max. (1804 ft) · Materials: To DIN or ASTM in all required material combinations

The KSB RDLP is an axially split volute casing pump designed for horizontal installation with one, two, or three stages and a double-entry radial impeller.

Flow rates: up to 80,000 gpm (18,200 m³/h) · Total head: up to 300 ft (90 m) · Power rating: 10,000 hp (7450 kW)

The KSB TBC is a horizontal end suction centrifugal pump designed for high-head and high-flow hydraulic transport of abrasive slurries.

Flow rates: 70,000 gpm (16,000 m³/h) · Total head: up to 260 ft (80 m) · Power rating: 8,000 hp (5960 kW)

The KSB WBC is a heavy-duty pump designed for long-distance ore and tailings slurry transport, capable of handling high pressures and sudden surge events.

Flow rates: up to 1760 gpm (up to 400 m³/h) · Total head: up to 115 ft (up to 35 m) · Pressure rating: up to 145 psi (up to 10 bar)

The KSB ZW is a double-suction vertical pump engineered for highly abrasive slurries and dewatering applications.

Flow rate (Q): ≤ 15000 m³/h · Head (H): ≤ 100 m · Materials Testing: Test report 2.2 on request

This KWP is a dry-installed, single-stage, single-suction centrifugal pump with a back pull-out design suitable for contaminated fluids, wastewater, and slurries.

Flow rate Q: ≤ 325 m³/h (≤ 90 l/s) · Head H: ≤ 100 m · Free-flow impeller (F): Fluids containing solids and stringy material, as well as fluids with entrapped air or entrapped gas

The KSB KWP-Bloc is a dry-installed, single-stage volute casing pump designed for handling contaminated fluids, wastewater, and slurries.

Flow rate (Q): ≤ 2600 m³/h (≤ 722 l/s) · Head (H): ≤ 260 m · Speed (n): 3500 rpm

The KSB B Pump is a vertical turbine pump designed for water supply applications, available in single or multistage configurations.

External lubrication flow rates for friction bearing bushes: 250 l/h, 320 l/h, 500 l/h, 650 l/h (per lubrication point, depending on pump size) · Head, max: 116 m / 102 m · Frequency: 50 Hz / 60 Hz

The KSB INVCP is a vertical, single-stage, radially split volute casing pump designed for organic and inorganic liquids in various industries.

Flow rate: Up to 2000 l/s · Head: Up to 30 m · Power: Up to 215 kW

The KSB AmaCan D is a submersible motor pump with an open multi-vane impeller designed for a variety of water transport applications including irrigation, stormwater.

Flow rate Q: ≤ 1500 l/s (≤ 5400 m³/h) · Head H: ≤ 30 m · Insulation material: EPR (ethylene propylene rubber)

The KSB Amacan K is a close-coupled, single-stage submersible motor pump designed for vertical installation in a discharge tube and suitable for contaminated.

Flow rate Q: ≤ 7000 l/s (≤ 25200 m³/h) · Head H: ≤ 12 m · Insulation material: EPR (ethylene propylene rubber)

The KSB Amacan P is a single-stage, vertical, submersible propeller pump designed for installation in discharge tubes and available in various material variants for...

Flow rate (Q): ≤ 3000 l/s (≤ 10800 m³/h) · Head (H): ≤ 40 m · Material variant G2: ≤ +40 °C

The KSB Amacan S is a submersible mixed flow pump designed for installation in a discharge tube, suitable for handling grey water, river water, stormwater.

Power Cable Length: 10 m (standard). Optional 15 m, 20 m (> 20 m on request) · Fluid Temperature: < 40 °C for all models · Permissible Ambient Temperature: 40 °C

The KSB Amaline is a submersible motor pump designed for horizontal, wet installation, featuring a self-cleaning axial propeller and models for various nominal diameters.

Head: up to 2,100 m · Speed: up to 4700 rpm · Capacity: up to 300 m³/h

The KSB RHM is a safety-related pump designed for critical applications including core flooding, emergency cooling, and high-pressure charging systems.

Head H: ≤ 105 m · Operating pressure p: ≤ 10 bar (Higher values available on request for individual sizes) · Fluid temperature T: ≥ -20 °C to ≤ +140 °C (Higher values available on request for individual sizes)

The KSB Vitacast is a hygienic, single-stage centrifugal process pump designed for food, beverage, and pharmaceutical industries.

Head: Up to 105 m · Operating pressure: Up to 10 bar (up to 14 bar on request for individual sizes) · Fluid temperature: Up to +140 °C (Higher temperatures on request)

The Vitacast Bloc is an investment-cast centrifugal pump designed for hygienic and sterile fluid handling in the food, beverage, and pharmaceutical industries.

Rated power: 0.55 kW to 45 kW · Nominal power: 110 kW (standard) or 1400 kW (on request) · Rated speed: 1500 rpm or 3000 rpm

PDF datasheet mirror for Vitachrom (KSB Pumps).

Flow rate (Q): ≤ 12.5 m³/h · Head (H): ≤ 150 m · Operating pressure (p): ≤ 16 bar

The Vitastage is a multistage, close-coupled hygienic centrifugal pump designed for food and beverage, chemical, and industrial applications handling pure liquids.

Flow rate: Up to 5,700 l/min (342 m³/h) · Head: Up to 200 m · Operating pressure: Up to 20 bar

The KSB Vitalobe is a rotary lobe pump designed for hygienic and sterile fluid handling in the food, beverage, and pharmaceutical industries.

Hexagon head bolt: Steel 8.8 A2A · Impeller Materials: Stainless steel 1.4571, 1.4408, 1.4308, available in projection-welded, laser-welded, or cast forms depending on the specific pump size · Materials testing: Test report 2.2 available on request

The KSB Etachrom B is a single-stage annular casing pump designed for horizontal or vertical installation with a back pull-out design.